The Original PlungeCup™

The Original PlungeCup™

🔧 Pneumatic vacuum grips the dent

🎨 Preserves factory paint completely

💰 Pays for itself in one fix

22 Left in Stock! Re-stocks 8/29/2026

60-Day Money-Back Guarantee. Try PlungeCup risk-free — if you're not satisfied with the results, we'll refund you in full.

Pneumatic Vacuum Grip. No hot glue, no adhesive, and no residue — just clean suction and a controlled pull that preserves your factory finish.

Shipping & Return Policy

All orders from PlungeCup process within 1-2 business days and standard shipping arrives within 5-9 days for most countries. Every purchase is backed by our 60-day money-back guarantee, so you can try PlungeCup's PlungeCup™ completely risk-free.

How it Works

PlungeCup's PlungeCup™ connects to any standard air compressor through the aluminum alloy air intake adapter. The pneumatic vacuum creates a powerful seal between the suction cup and your vehicle's panel — no hot glue, no adhesive tabs, and nothing that risks damaging your paint.

Choose the right suction cup size (80mm, 120mm, or 155mm) for the dent, position it over the center, engage the vacuum, and pull the slide hammer back in one firm motion. The metal pops back into shape and the suction cup releases cleanly. Works on hoods, doors, fenders, quarter panels, trunks, and any smooth body panel with intact paint.

free shipping on your first order.

View full details

Loved By 10,000+ Car Owners Who Refused To Pay A Body Shop For A Simple Dent

PlungeCup™ vs Body Shops and Glue Pullers

A body shop bills hours for a fix that takes seconds, and glue-based pullers risk damaging the finish they're supposed to save.

  Body Shops & Glue

Pulls Dents Out In Seconds

No Hot Glue Or Residue

Preserves Factory Paint Finish

All-Metal Professional Build Quality

Three Suction Cup Sizes Included

Connects To Any Air Compressor

Saves Hundreds Per Dent Repair
Pneumatic Vacuum

Air compressor powers the suction grip instead of hot glue or adhesive tabs.

All-Metal Construction

Full aluminum body, copper switch, and steel slide hammer built to last.

Three Cup Sizes

80mm, 120mm, and 155mm suction cups for small, medium, and large dents.

60-Day Guarantee

Try it risk-free. Full refund if you're not satisfied.

What Car Owners Are Saying

4.7

3,847

  • Mike R. Jul 2026
    Verified Purchase
    My wife thought I took it to the shop
    My wife came home from Target with a dent in the driver's door. Body shop quoted eight hundred fifty dollars. I ordered PlungeCup, waited three days, hooked it up to the compressor in the garage, stuck the medium cup on, pulled the slide hammer back once, and the dent popped out clean. The whole thing took less than a minute. My wife thought I took it to the shop while she was at work. I showed her the receipt for the tool and she still didn't believe me.
    Was this helpful? 84 5
  • Eric J. Jun 2026
    Verified Purchase
    Saved me $700 on my truck
    Saved seven hundred bucks on a parking lot dent. One pull. Factory paint untouched. Keeping this in the garage forever.
    Was this helpful? 53 3
  • Trevor P. Jun 2026
    Verified Purchase
    three dents on three different cars in one afternoon
    ok so i bought this after a hailstorm put a handful of shallow dents in my truck. figured i'd try it before paying a body shop two grand. hooked it up to my little pancake compressor in the garage and started on the worst dent first, right on the hood. stuck the big cup on it, pulled the slide hammer back, and i heard that pop and the metal just came right back. did the rest of the truck in about twenty minutes. then my neighbor comes over and goes hey can you do mine and then his wife pulled her car out too. i did three vehicles in one afternoon and every dent came out clean. no paint damage, no residue, nothing. the body shop wanted two grand just for my truck. this thing cost me like fifty bucks.
    Was this helpful? 91 6
  • Sarah N. May 2026
    Verified Purchase
    Fixed my lease return before the inspection
    Got this specifically because my lease was ending and I had two door dings that would've cost me at the dealership. Used the small cup on both, pulled clean, and the inspection came back with ZERO deductions for body damage. This tool paid for itself fifty times over on one lease return.
    Was this helpful? 47 2
  • Bill T. May 2026
    Verified Purchase
    Works with a basic garage compressor
    Our compressor is nothing special, just a twenty-gallon unit from Home Depot. PlungeCup connected fine, held vacuum immediately, and the slide hammer pulled three dents out of my daughter's Corolla without a single mark. You do not need a professional setup for this.
    Was this helpful? 18 1
  • Dave K. Apr 2026
    Verified Purchase
    What it fixes and what it doesn't
    Here's my honest take after using PlungeCup on six dents across two vehicles. It works extremely well on shallow dents where the paint is intact and the metal isn't creased. Parking lot dings, shopping cart hits, minor hail, anything where the panel just needs to be pulled back out. The suction grip is strong and the slide hammer gives a clean, controlled pull. But I want to be clear about the limits. If the dent has a sharp crease, if the paint is cracked, or if the panel is severely bent, you need a body shop. PlungeCup handles the dents that body shops overcharge for. The structural stuff still belongs to a professional.
    Was this helpful? 69 4

Frequently Asked Questions

How do I use PlungeCup™?

Connect the air intake adapter to any standard air compressor, screw on the appropriate suction cup size for your dent (80mm for small, 120mm for medium, 155mm for large), position the cup over the center of the dent, open the pneumatic switch to engage vacuum suction, and pull the slide hammer back in one firm motion. The metal pops back into position. The entire process takes seconds.

What kind of dents does PlungeCup™ work on?

PlungeCup works best on shallow, round dents where the paint is still intact — parking lot dings, shopping cart dents, minor hail damage, and body panel dents that haven't creased the metal. It is not designed for sharp creases, deep structural damage, or areas where paint has cracked or chipped.

Do I need a professional air compressor?

No. PlungeCup works with any standard household or garage air compressor, including basic pancake-style compressors. The 7mm air inlet is compatible with standard quick-connect fittings. No specialized equipment or professional setup is required.

How long does shipping take?

Orders from PlungeCup process within 1-2 business days and standard shipping typically arrives within 5-9 days for most US locations. You'll receive a tracking number as soon as your order ships so you can follow it the whole way.

What if I don't like it?

Try PlungeCup for 60 full days. If you're not satisfied with the results, send it back for a complete refund under our 60-day money-back guarantee. No restocking fees, no questions asked, and we cover the return shipping.